Maxon CP-9 Specifications download pdf (Page 11)

CORPORATION

MUNCIE, INDIANA, USA

INDUSTRIAL COMBUSTION EQUIPMENT AND VALVES

Maxon practices a policy of continuous product improvement. It reserves the right to alter specifications without prior notice.

Page 6100-S-11Electro-Mechanical Valves

Overhead Wheel & Chain Assembly

Overhead wheel and chain assembly allows

operation of a manual reset valve in an otherwise

inaccessible overhead location. A wheel is mounted

onto the handle of the valve. The attached chain is

weighted on one end and has a paddle handgrip on

the other.

Once the valve is electrically energized, pulling

down on the paddle will open normally closed ver-

sions or close normally open versions.

Maxon valve's free-handle design permits valve to

trip to its rest position on any power interruption.

Wheel and chain assembly includes a length of

chain to position the paddle handgrip slightly below

pipe centerline. A standard length of 7 feet of chain is

included with CP and larger valve sizes and 5 feet is

included with all other valves. Extra chain (in one foot

increments) may be specified to fit your specific

location.

NOTE: Overhead wheel & chain can only be mounted

on swinging gate valves with the top assembly

position TO.

Approximate envelope dimensions

(nominal, in inches)

Swinging gate valves Rising stem valves

2.31 dia.

12.19

Maximum

6.94

4.06

7.25

12.19

Maximum

5.25

Maximum

2/00

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Maxon CP-9 Specifications Page 11