Maxon SL6000 Series User Manual

Programming Manual SL6000 Series Page 1 of 26

Programming Manual SL6000 Series Page 10 of 26 Program Mode To place the SL6402/6102 into program mode, connect PK-SL6000-01 programming lead to the

Programming Manual SL6000 Series Page 11 of 26 Place the slave radio (the radio which is not programmed, or has program information that will be era

Programming Manual SL6000 Series Page 12 of 26 Standard Radio Parameters Radio parameters (Fig.11) Radio Band To select Band click on “Radio band”

Programming Manual SL6000 Series Page 13 of 26 Select Radio Parameters Frequency To select the correct frequency double click on the desired channe

Programming Manual SL6000 Series Page 14 of 26 CTCSS setting (Fig.13) CCCTTTCCCSSSSSS

Programming Manual SL6000 Series Page 15 of 26 CTCSS Table No. Freq. Hz No. Freq. Hz No. Freq. Hz No. Freq. Hz No. Freq. Hz 01 67.0 11 94.8

Programming Manual SL6000 Series Page 16 of 26 DCS & DCS Table To set the DCS (Digital Coded Squelch) click on correct RX/TX DCS, scroll to co

Programming Manual SL6000 Series Page 17 of 26 Group Setting To select a group single click on Group Setting, then select ON. To select the number o

Programming Manual SL6000 Series Page 18 of 26 Options (Fig.18) General Option Beep This setting will turn the switch on melody globally and key pr

Programming Manual SL6000 Series Page 19 of 26 Busy Ch. Lock The radio has several inhibit functions which restrict transmission under the following

Programming Manual SL6000 Series Page 2 of 26 Contents Introduction ...

Programming Manual SL6000 Series Page 20 of 26 Powersave PowerSave (Enable/Disable) Use powersave or not. Powersave delay Time (1~8) Set ‘power sav

Programming Manual SL6000 Series Page 21 of 26 DTMF DTMF Short for Dual Tone Multi-Frequency, the system used by touch-tone telephones. DTMF assi

Programming Manual SL6000 Series Page 22 of 26 Scanning Parameters Scan TX When priority channel is enabled, select [Priority Scan TX] or [Priority

Programming Manual SL6000 Series Page 23 of 26 Settings and Timings TOT (Enable/Disable): Use ‘TX timeout time’ or not. TOT Time (OFF/10~990): Set

Programming Manual SL6000 Series Page 24 of 26 Password Password (Enable/Disable) Activates and deactivates the password function. Password code (4

Programming Manual SL6000 Series Page 25 of 26 VOX The VOX setup can be found within the Options page. Transmit signal immediately without pushing P

Programming Manual SL6000 Series Page 26 of 26 Contact Details Should you have any queries regarding this manual, or the information within it, plea

Programming Manual SL6000 Series Page 3 of 26 Frequency menu...

Programming Manual SL6000 Series Page 4 of 26 (Fig.23)...

Programming Manual SL6000 Series Page 5 of 26 Introduction The SL6000 Series Programming Manual is to be used in conjunction with the SL6000 Series

Programming Manual SL6000 Series Page 6 of 26 Programmer Installation The SL6000 Series programmer is best downloaded from the Maxon CIC website; if

Programming Manual SL6000 Series Page 7 of 26 Programming This programmer will program the radio parameters and the DTMF features without the need

Programming Manual SL6000 Series Page 8 of 26 There are 5 items in the top right hand side tool bar, File, Edit, Program and Help. File Files can

Programming Manual SL6000 Series Page 9 of 26 Com Port select The com ports can be changed from the drop down list on the programming progress windo