Maxon WL7 Specifications download pdf (Page 28)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

HAND CONTROL

FIG. 28-2

UNFOLD

FOLD

DOWN

2. Use hand control (FIG. 28-2) to

UNFOLD Lift to vehicle floor level.

Then lower the Lift DOWN to ground

level.

3. Use hand control (FIG. 28-2) to raise

Lift UP to vehicle floor level.

4. The edge of the Inboard Rollstop

should line up with the edge of the

Base Plate as shown in FIG. 28-3.

FLOOR SWITCH ADJUSTMENT

INBOARD ROLLSTOP LINED

UP WITH BASE PLATE

FIG. 28-3

INBOARD

ROLLSTOP

NOTE: The Platform FLOOR switch adjustment screw is always on the opposite side of

the Lift from the Pump Cover.

BASE PLATE

+1/4”/-0”

STOWED LIFT

(PUMP ON LH SIDE )

FIG. 28-1

ILLUMINATED

POWER SWITCH

1. Make sure power switch (FIG. 28-1) is

turned on and illuminated. Stow the Lift

(FIG. 28-1).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 60 61

No comments

Maxon WL7 Specifications Page 28